Skip to content

Employers · 9 min read

Facility maintenance staffing for Jacksonville buildings

How Jacksonville employers can combine custodial and maintenance coverage: scoping the work, who does what, schedules, access, safety, walk-throughs and more.

Most buildings need two kinds of care. One crew keeps the place clean. Another keeps it working. When the two are planned apart, small tasks fall between them, and the facility manager ends up chasing both.

This guide is for facility managers, property managers and operations leads who want custodial and maintenance coverage that works as one program. It covers scoping the work, deciding who does what, schedules and access, and safety. It also covers quality walk-throughs, communication with the facility manager and when an on-site program makes sense for a building, campus or industrial site in Northeast Florida.

Why plan cleaning and maintenance together

Cleaning and maintenance touch the same rooms, the same equipment and the same tenants. A custodian notices a dripping faucet first. A maintenance technician leaves dust and debris after a repair. A restroom that is clean but has a broken dispenser still draws complaints.

When both crews follow one plan, those overlaps become handoffs instead of gaps. The custodian reports the faucet, the technician fixes it, and the custodian cleans up after. Nobody has to guess whose job it was.

A combined plan also helps you staff with fewer surprises. You can see the full list of tasks, decide which skills each one needs and set headcount from there. That makes it easier for a staffing agency to recruit the right mix of people.

This approach suits many kinds of sites around Jacksonville. Office buildings on the Southside and Downtown, school and church campuses, medical buildings and plants on the Westside or near Cecil Commerce Center all mix cleaning and upkeep.

Scope the work in layers

Start with a walk of the site and a list of every recurring task. Then sort each task into a layer. The layers help you see which skills you need and how many people it takes.

Be specific about frequency. A task done every day calls for a different plan than one done each quarter. Note which tasks need the building empty, such as floor stripping or work on a shared water line.

  • Daily cleaning: trash, restrooms, break rooms, lobbies, high-touch surfaces, vacuuming and restocking supplies.
  • Floor care: sweeping and scrubbing hard floors, carpet extraction, stripping, waxing and burnishing on a set rotation.
  • Light maintenance: changing bulbs and filters, patching and painting, adjusting doors, replacing ceiling tiles and simple fixture repairs.
  • Technician work: troubleshooting plumbing, electrical, HVAC or production equipment, and handling work orders that need trade skills.
  • Helper support: carrying materials, setting up work areas, moving furniture and cleaning up after repairs.

Define who does what

The roles in a facility program often blur together. A porter may be asked to hang a picture. A maintenance helper may be asked to clean a spill. Some of that is normal. The problem starts when no one wrote down where each role begins and ends.

Write a short role sheet for each position. List the tasks the role owns, the tasks it supports and the tasks it should never attempt. Share it with your recruiter so the people who arrive expect that work.

Licensing belongs in this step. Some electrical, plumbing and HVAC work must be done by a licensed professional under Florida and local rules. Make sure those tasks go only to people who hold the right license. Helpers should work under the supervision those rules require.

  • Custodian or porter: daily cleaning, restocking and reporting problems they notice.
  • Floor technician: floor care on a schedule, and the machines that go with it.
  • Facilities helper: room setups, furniture moves, light tasks and support for technicians.
  • Maintenance technician: work orders, preventive maintenance and repairs within their skill level.
  • Lead: assigns daily work, checks quality and is the main contact for the facility manager.

Set schedules and access that fit the building

Cleaning and maintenance often run on different clocks. Day porters work while people are in the building. Floor care and heavy cleaning often happen after hours. Maintenance work orders may follow business hours, with planned work set for quiet times.

Map the schedule for each role on one page. Show who is on site and when. Look for times when a technician needs a helper or when cleaning must follow a repair. Plan those overlaps on purpose.

APS places facility workers on first shift and more. Tell us the hours each role needs when you place the order, and we will recruit for those schedules. If some hours are flexible, say so.

Access needs one owner. Decide who issues keys and badges, who holds alarm codes and which rooms stay locked. Mechanical rooms, electrical rooms and roofs often need tighter rules than offices. Keep a written log, and collect keys and badges when an assignment ends.

Think about the commute when you set start times. A campus across the St. Johns River from where most workers live can mean long trips at early hours. Share the site address with your recruiter so they can look for people who can reach it reliably.

Safety for cleaning and maintenance crews

Combined crews face a wider range of hazards than either group alone. Custodians handle chemicals and floor machines. Technicians work near energized equipment, at height and in tight spaces. Helpers can be exposed to both.

Two OSHA topics come up often in facility work. The first is hazard communication: workers must be informed and trained about the hazardous chemicals they use. The second is the control of hazardous energy, often called lockout and tagout. It covers how equipment is shut down and kept off during service.

Follow OSHA's rules and your own written procedures, and train every new worker on them before they start the task. Keep the training specific to your site. A generic talk does not show someone where your shutoffs are.

  • Keep safety data sheets where crews can reach them, and keep labels on every container.
  • Show which products must never be mixed and what protective gear each task needs.
  • Explain your lockout and tagout procedure, and who is authorized to apply locks.
  • Tell custodians and helpers to stay clear of locked-out equipment and never remove a lock or tag.
  • Mark wet floors and work zones so cleaning and repair work do not create new hazards.
  • Cover ladder and lift rules, and follow OSHA's heat guidance for roofs, attics and outdoor work.
  • Make it easy to report injuries, near misses and unsafe conditions.

Quality checks and walk-throughs

Quality in a facility program means two things. The building looks clean, and things work. A walk-through should check both.

Pick a regular rhythm and stick with it. Walk the same route with the lead each time, so you can compare one visit with the last. Look at cleaning results, open work orders and anything a tenant has raised.

Close the loop on what you find. Every issue should leave the walk-through with an owner and a date. Then check it on the next visit. Crews take a checklist seriously when they see it used.

  • Restrooms: clean, stocked and with working fixtures, dispensers and lights.
  • Common areas: floors in good shape, trash out and no damaged furniture or ceiling tiles.
  • Work orders: which are open, which are late and which keep coming back.
  • Preventive tasks: filters changed, equipment checked and logs up to date.
  • Supplies and tools: enough on hand, stored safely and in working order.
  • Feedback: what went well, shared with the crew along with what needs work.

Communication with the facility manager

A combined program runs smoothly with one clear line to the facility manager. Usually that is the lead. The lead gathers updates from both cleaning and maintenance and brings them forward in one place.

Agree on how requests come in. Some sites use work order software. Others use a shared log or a simple email address. Whatever you choose, use it for every request, so nothing lives only in a hallway conversation.

Set a short regular check-in between the facility manager and the lead. Cover open work, upcoming events, planned shutdowns and staffing needs. Bring the staffing agency in when headcount or skills need to change.

Tell crews what is coming. A tenant move, a floor project or a planned water shutoff changes the day for everyone. Workers who hear about it ahead of time plan around it instead of reacting to it.

When an on-site program helps

Some sites need more coordination than a lead can provide alone. Large campuses, industrial sites and buildings with many contract workers often fall into this group. So do sites where cleaning and maintenance crews change often.

With an APS on-site staffing program, an APS coordinator works at your site. The coordinator handles attendance, onboarding and feedback for the workers APS places. That frees your facility manager to focus on the building.

An on-site program can also help when you are opening a new building or adding a shift. New workers get a consistent start, and problems reach the right person sooner. Ask your recruiter whether your site is a good fit.

Smaller buildings may not need that level of support. For them, a clear role sheet, a steady lead and a recruiter who stays in touch can be enough.

Working with All Purpose Staffing

All Purpose Staffing is headquartered in Jacksonville, with an office on Baymeadows Road. We place custodians, porters, floor technicians, facilities helpers and maintenance technicians across Duval, Clay, St. Johns and Nassau counties. We offer contract staffing, contract-to-hire and direct hire.

For contract workers, APS is the employer of record and handles payroll, taxes, workers' compensation and the I-9. We put worker satisfaction first, because workers who are treated well stay. A recruiter stays in touch after placement.

To get started, send us your task list, your role sheets, the schedule for each role, your access and safety rules and your start date. We will help you find the right mix of people.

Common questions

Can one staffing agency provide both custodial and maintenance workers in Jacksonville?

Yes. APS places custodians, floor technicians, facilities helpers and maintenance technicians across Northeast Florida. Share your full task list and role sheets so the agency can recruit the right mix for your site.

What is the difference between a facilities helper and a maintenance technician?

A facilities helper handles light tasks, room setups and support for technicians. A maintenance technician handles work orders and repairs that need trade skills. Write down which tasks each role owns so both know where their work begins and ends.

Can contract maintenance workers do electrical or plumbing work?

It depends on the task. Some electrical, plumbing and HVAC work must be done by a licensed professional under Florida and local rules. Tell your recruiter when a license is part of the role, and check current requirements for your work.

Who trains contract workers on lockout and tagout?

Training is shared. The staffing agency covers general safety, and your site covers its own equipment, procedures and lockout and tagout steps. Follow OSHA's rules and train each worker before they start the task.

How often should I do a facility walk-through?

Pick a regular rhythm that fits the size of the site and stick with it. Walk the same route with the lead each time. Give every issue an owner and a date, and check it on the next visit.

When does an on-site staffing program make sense for facilities?

It often helps on large campuses, industrial sites and buildings with many contract workers. An APS coordinator on site handles attendance, onboarding and feedback. Ask your recruiter whether your site is a good fit.

Related pages

Ready for a workforce that stays?

Request Talent